How much can you fit in a 1cc Rig?

[Tainted]

Originally Posted by inailedyourmom1

Ok so this has all been about oxyc . What about IRs . I find. 1mg per unit. So about. 3 per 1ml. That optimal. Some times. I can squeeze one or two more in but seems like a waste. What about drawing up 3 and the using that solution to draw up another 3. Cause I need to do 8 to 10 for a real rush and just. Can't fit it all in. Sorry if the post looks. Weird. I'm using. A "smart pHone"

The post above yours, I was referring to roxys. I do 3-6 in a shot.

[retrogradeamnesia]

I was referring to specifically 80mg Oxycontin..I dont think it would be a stretch to assume IR would dissolve better. Unfortunately in oz only IR products are Endone and Oxynorm

[euphoricontin17]

I honestly think when you use something that grades the pill up as a fine as say, a hoseclamp, it really no longer matters if the pill is ER or IR, but either way the oxycodone solubility remains the same. We're talking about how much oxycodone can dissolve in the water not fillers and oxy, so I think the actual amount of filler is irrelevant. Although, some of you may be familar with the term "supersaturated" it's used in chemistry.

When a solution is "saturated" it is holding the maximum amount of a given substance. What can happen though is that the temperature of the solvent, in this case water, can be manipulated to some degree either up or down which MAY allow more oxy to temporarily be dissolved this is the phenominon known as "supersaturation" I do not know if it's possible with oxy though as the temp needed to achieve this may be either too hot for the oxy or to boot or too cold to boot. Just a theory... I stand by diesel's statement that it's 160mg/ml or 100 units, does NOT matter what kind of Oxycodone you use. I still wash it three times anyway then eat the goop just to be safe.

[retrogradeamnesia]

Originally Posted by Woody Bear

From my post in another thread: http://forum.opiophile.org/showpost....5&postcount=63

--------------------------------------------------------------------------------
http://bulkpharm.mallinckrodt.com/_a...msds/OXONE.htm

--------------------------------------------------------------------------------

Well im going to agree with the MSDS Each to their own I guess...
IME its def worth using a warm solution as it does seem to increase solubilty

[mtren]

what they need to do is make rigs that are bigger then 1 cc! i wish they had 1.5 or 2 cc syringes. do they? i never seen them before and have asked pharmacies for anything bigger then 1 cc bu they said they dont have them. yeah 2 80s seems to fit. ive tried like 3 80s too and i mean it def couldnt hurt to put more and you can just wash it down a second time and third time to ensure you got all of it out.

[mtren]

and it seems those 30 mg r 215 blues are a lot harder to load then like the m 30 blue irs or ocs u know like 40s or 80s or what have you. the m 30s hit HARD when you iv them

[Funkit]

Originally Posted by mtren

and it seems those 30 mg r 215 blues are a lot harder to load then like the m 30 blue irs or ocs u know like 40s or 80s or what have you. the m 30s hit HARD when you iv them

Does Texas have good dope? If you're IVing I feel like you'd save a shit ton if you switched to dope, and I've heard the withdrawals are basically equally as bad. You'd probably save money.

Unless it's tar.

(Disclaimer: Not condoning you do either or suggesting doing heroin is better or good for you).

[Citrus]

80mg = 1 shot + 1 wash, then its pretty much useless to me.
160mg = 1 shot + 2 wash, then its pretty much useless to me.
Thats the most I've ever fucked around with, and when I do my washes, the first one always seems like 1/3 or 1/4 as strong as the first original shot.

Just my two cents.

[hero 1]

i put 5 80s in a spoon add a plunger cap full of water about 120 units of water and shoot that. I tried 6 one time and had to leave the room for a second when i returned it was all solid so i think 5 is the mostyou can get in a 1cc rig. I also keep the wax around for hard times get pretty good wash shots

[duck]

jesus christ, 5 80s in a 1cc? Thats crazy man. The liquid must be t h i c k ??

[erica]

Originally Posted by hero 1

i put 5 80s in a spoon add a plunger cap full of water about 120 units of water and shoot that. I tried 6 one time and had to leave the room for a second when i returned it was all solid so i think 5 is the mostyou can get in a 1cc rig. I also keep the wax around for hard times get pretty good wash shots

Bet that vein packed its bags and said goodbye, eh?

[Thanat0s]

psht.
not oxy but...
my 1cc rigs topped out
about
1.2g tar
+
.25-.4g coco

thick sludge shots.
in the neck.
syrupy numbing golden ringing goodness.

ive loaded 2 oc max,

SHOOTING OC MAKES TAR SEEM CLEAN.

[hero 1]

Originally Posted by erica

Bet that vein packed its bags and said goodbye, eh?

i do the four tie method place a tie around each limb and the first vein i see gets the pin yea my veins are seriously fucked up and yea duck its like syrup on pancakes that is why i prefer the herion to oxys i got some 3cc fits from the exchange but cant find a 28 gauge or higher point