Shake and bake

[sgreenman420]

Can anyone out there tell me the correct method to make shake and bake. Or point out a site that tells exact process.

[30_Units]

Sketchy!

If you can't figure out the basics through google and keywords even this very, very simplified birch reduction, you don't need to be messing around with the constituents.

Plus I'm pretty sure it's against the rules.

And illegal! We don't break laws here at opiophile. Ever.

[nodrover]

Damn....I had never head of "shake and bake" until I saw this thread....and then I googled it. I guess it's because I live in CT. I have never seen that stuff around anywhere near here.....

And SGreenman; I can't possibly see why you can't find info about this topic through google, like 30Units said. I just typed it in, and there were recipes flying at me left and right!

[GOLD N DIEMONDS]

Originally Posted by 30_Units

Sketchy!

If you can't figure out the basics through google and keywords even this very, very simplified birch reduction, you don't need to be messing around with the constituents.

Plus I'm pretty sure it's against the rules.

And illegal! We don't break laws here at opiophile. Ever.

+1 --WHAT WITH THESE OLDER ACCOUNT WITH VERY LOW POSTS ASKING THIS SHIT AS OF LATE??????

[EleusisII]

hey guise!

Off topic here, but me and a friend of mine just hijacked a 40.000 BRT Dutch containership... Know where we could stash it, till heat is off?

Thnxx!


BTW: IF YOU OR ANYONE YOU KNOW WOULD LIKE TO BUY 15000 TONS OF FUEL OIL, MSG ME, PLS!
ALSO FOR SALE, 4-50000 T OF SCRAB METAL, BRAND NEW (ALSMOST) B&W 6000 HP DIESEL ENGINES, 16 FILIPINO (LARGELY UNHURT) SEAMEN... WB PLS!

[hopefiend]

Originally Posted by EleusisII

hey guise!

Off topic here, but me and a friend of mine just hijacked a 40.000 BRT Dutch containership... Know where we could stash it, till heat is off?

Thnxx!


BTW: IF YOU OR ANYONE YOU KNOW WOULD LIKE TO BUY 15000 TONS OF FUEL OIL, MSG ME, PLS!
ALSO FOR SALE, 4-50000 T OF SCRAB METAL, BRAND NEW (ALSMOST) B&W 6000 HP DIESEL ENGINES, 16 FILIPINO (LARGELY UNHURT) SEAMEN... WB PLS!

hahaha you are the man E!!!
ill take the 16 phillipinos for my meth lab...

[port rhombus]

Damn, I saw 16 filipinos and got all excited... but I've got all the seamen I need right here.

har har har har

/creepy

[Ickyuck]

My lunch came out of my mouth, almost, Port Rhombutt.

[AnitaFix]

Originally Posted by sgreenman420

Can anyone out there tell me the correct method to make shake and bake. Or point out a site that tells exact process.

Just so you know i do not recommend this for a few reasons.

..yes good blow does not need heat to dissolve but there is always all kinds of cut & dirty shit mixed in, or macteria etc,. Best method to inject is always dissolving stuff in a cooker with minimal heat & a filter (if you can obtain a micron filter - this is the best method). If you can't acquire this cotton, hopefully the high grade will suffice. Try to stay away from shit like cigarette filters or anything suspicious looking (check the recent thread about cotton fever - not worth it man).

Only people who "should" shake&bake (rather what I will describe is shake-no-bake) are on the street & dont have an option to use a spoon etc,.

So the more common way is get a works & pull out the plunger. Put the shit in (good coke about a .1 is fine for a threshold shot, but start small.. I have a friend who is a hog with heroin but needs very little blow to get the bells ringing, while I would use 2X/3X amount). Remember that you dont want to OD on this stuff. I think there is no antidote for cocaine , maybe downers but I doubt that will help with the seizure & Ive seen guys bite down on their tongue its fucking nuts.

Anyway put the coke in the works , add some water maybe 30-50 units on top (try to make sure you get the coke as far down into the barrel as possible. Cover the opening with your finger & shake until the stuff is dissolved. CAREFULLY put the plunger in just enought & invert the surringe tapping it to make sure the liquid is all at the bottom & all the air is near the tip at the needle. Push out all the air & you are ready to go. This stuff can get clogged more often then if you dissolve it in a spoon & filter so dont be surprised.

MY way of doing it is a little better. Same as above put all the coke in the barrel but replace the plunger making sure all the crumbs up top make it in. Suck up water by pulling the plunger back a bit (so the coke is already in the works & you just suck the water so it all mixes up). This way you don't need to worry about having the solution come in contact with your finger, worry about re-inserting the plunger after etc,.). Again, shake it up making sure there is about 50/50 air/water in the hype, push out the air, blast off.

Hope you got your answer & understand maybe this will save you a minutes time but it's just not worth it. Shooting C is bad enuff as it is.

[chopstix]

Dude it's a speed synth, nothing to do with booting coke..

[nodrover]

Originally Posted by AnitaFix

Just so you know i do not recommend this for a few reasons.

..yes good blow does not need heat to dissolve but there is always all kinds of cut & dirty shit mixed in, or macteria etc,. Best method to inject is always dissolving stuff in a cooker with minimal heat & a filter (if you can obtain a micron filter - this is the best method). If you can't acquire this cotton, hopefully the high grade will suffice. Try to stay away from shit like cigarette filters or anything suspicious looking (check the recent thread about cotton fever - not worth it man).

Only people who "should" shake&bake (rather what I will describe is shake-no-bake) are on the street & dont have an option to use a spoon etc,.

So the more common way is get a works & pull out the plunger. Put the shit in (good coke about a .1 is fine for a threshold shot, but start small.. I have a friend who is a hog with heroin but needs very little blow to get the bells ringing, while I would use 2X/3X amount). Remember that you dont want to OD on this stuff. I think there is no antidote for cocaine , maybe downers but I doubt that will help with the seizure & Ive seen guys bite down on their tongue its fucking nuts.

Anyway put the coke in the works , add some water maybe 30-50 units on top (try to make sure you get the coke as far down into the barrel as possible. Cover the opening with your finger & shake until the stuff is dissolved. CAREFULLY put the plunger in just enought & invert the surringe tapping it to make sure the liquid is all at the bottom & all the air is near the tip at the needle. Push out all the air & you are ready to go. This stuff can get clogged more often then if you dissolve it in a spoon & filter so dont be surprised.

MY way of doing it is a little better. Same as above put all the coke in the barrel but replace the plunger making sure all the crumbs up top make it in. Suck up water by pulling the plunger back a bit (so the coke is already in the works & you just suck the water so it all mixes up). This way you don't need to worry about having the solution come in contact with your finger, worry about re-inserting the plunger after etc,.). Again, shake it up making sure there is about 50/50 air/water in the hype, push out the air, blast off.

Hope you got your answer & understand maybe this will save you a minutes time but it's just not worth it. Shooting C is bad enuff as it is.

Dude.....he is not talking about shooting up without filtration. The shake and bake he is referring to is a method of manufacturing me__amphetam_ne. (thought I would use the underscores to avoid saying anything against the rules. 30Unit's post got me kind of on the alert about this thread.I mean there must be a reason why the name hasn't been mentioned thus far.

[AnitaFix]

oh sorry I didn;t know. This is , at least in these parts what that refers to. I have never heard that being used in reference to anything else & seeing it in the Stimulant forum you could see how I got the wrong idea.

Fully agree w/ you that if this guy is asking about a synth I wouldn't bother saying a thing

[nodrover]

Originally Posted by AnitaFix

oh sorry I didn;t know. This is , at least in these parts what that refers to. I have never heard that being used in reference to anything else & seeing it in the Stimulant forum you could see how I got the wrong idea.

Fully agree w/ you that if this guy is asking about a synth I wouldn't bother saying a thing

Yeah man, I'm in the same boat as you. I have never heard of "shake and bake" before reading this thread. Your not alone

[hovadagod]

Shake and bake were 2 MJ dealers in the BX. Many others took the name after they moved on with life.

[GOLD N DIEMONDS]

Originally Posted by nodrover

Dude.....he is not talking about shooting up without filtration. The shake and bake he is referring to is a method of manufacturing me__amphetam_ne. (thought I would use the underscores to avoid saying anything against the rules. 30Unit's post got me kind of on the alert about this thread.I mean there must be a reason why the name hasn't been mentioned thus far.

SHIT- does Not matter, you'll still get BANNED
way to go champ