MS Contin whats easiest way to...

[Bad Monkey]

Hi fellow chasers, I'm currently being prescribed MS Contin approx. 5 ta 6 grams a week(100mg tabs),this has been going on for about 8 or 9 years.And I've been banging it since day one,and boy have I alot of damage to my veins,mainley due to ignorance.I used to heat it up to boling point then banging the cloudy mixture.DOH:I now use a cold water method and filtrate it with a 0.45um wheel filter,shit it fucken looks cleaner than my tap water. So that being said whats the best way to convert the Morph solution back to powder/crystal.The method Ive tried is putting it spoon running a very crude steam bath.Till the water content evporates.A friend of mine got hold of some actic anhydrideSo last night I mulled up 10 tabs 1000mg/1gram,but the yeild was only aprox. 400mg(pissed right off),anyway I went ahead with the experimental cookup, I was up till 4 in the morning(it took about 3hours for the morph to disolve.Leaving me with a lite brown solution.I then put it in a spoon and heated it till it caught on fire burning for about a minute,leaving me with dark brown Tar.I mulled it all up and had about half of it(IV of course),about 2min later I could feel it coming on&on&on then lights out.I woke up 3hrs later with nearly all of keyboard letters imprinted on my forehead,yea I was on the PC when I nodded ofDOH: Secondly how dangerous is this dope I made up.I know one thing I hav'nt felt that stoned for a very long time.

[Bad Monkey]

All of the above is a lie

[caesee]

never would do anything that stupid... I am prescribed ms contin, and do not even chew them, being as I take percs for breakthrough pain....... why would you just get or ask for oxys or buy a bag of h if you want to slam....I know people say its a good rush but again why!!!???

[paesan]

Yo just hypothetically speaking how would one go about converting aprox. 50gm of 98%+ pure morphine hydrochloride anahydrous into 1st)Morphine Base 2)Diacetylmorphine Base 3)DiacetylMorphine HCL???

If anyone knows the standard method using just AA as well as the faster method using the DMAP as a catalyst please post. Just remember that these are all lies, none of it's real...I mean Opiophile's just a figment of my imagination anyhow...

[JoyDivision]

I don't know why anyone would want to inject anything other than proper morphine ampules or good quality smack.

[bogumil]

Wow. Youre not very careful, man. And interesting what our bodies can take! But good that you switched to the 0.45 ym filters. Way better.

Now to your experiment. Did you cook it with AA? did I get that right? You should get the same yield as you put in the vessel, even a bit more, theoretically that is.

To recrystallize it, you should make sure that the pH is around5.5 - 6. Then just evaporate off the water. But you did this, or? I mean the dope seems to be strong, LOL. I just dont know why you would burn it on the spoon? Is this called for in the proceudre? I think cooking until the smell of vinegar is gone should be enough. I dont think it is dangerous. But it might be dangerous, when you burn it. I would just cook it, like I said above.

So, I would say, do this:

put the morph in a vessel together with the AA and then in the ofen. Cover the vessel and turn the oven up. Then after 4 hours take a look and check if it still smell like vinagar. If it does, go on cooking.

When the smell is gone or after 6 hours, take the vessel out, evaporate the rest of liquid but dont let it catch fire.

Then let it dry completely and add some HCl diluted with water. Only a few drops If you can check the pH, go for 5.

Then dry it, yield it and chop it.

[shaunclo]

Originally Posted by Bad Monkey

Hi fellow chasers, I'm currently being prescribed MS Contin approx. 5 ta 6 grams a week(100mg tabs),this has been going on for about 8 or 9 years.And I've been banging it since day one,and boy have I alot of damage to my veins,mainley due to ignorance.I used to heat it up to boling point then banging the cloudy mixture.DOH:I now use a cold water method and filtrate it with a 0.45um wheel filter,shit it fucken looks cleaner than my tap water. So that being said whats the best way to convert the Morph solution back to powder/crystal.The method Ive tried is putting it spoon running a very crude steam bath.Till the water content evporates.A friend of mine got hold of some actic anhydrideSo last night I mulled up 10 tabs 1000mg/1gram,but the yeild was only aprox. 400mg(pissed right off),anyway I went ahead with the experimental cookup, I was up till 4 in the morning(it took about 3hours for the morph to disolve.Leaving me with a lite brown solution.I then put it in a spoon and heated it till it caught on fire burning for about a minute,leaving me with dark brown Tar.I mulled it all up and had about half of it(IV of course),about 2min later I could feel it coming on&on&on then lights out.I woke up 3hrs later with nearly all of keyboard letters imprinted on my forehead,yea I was on the PC when I nodded ofDOH: Secondly how dangerous is this dope I made up.I know one thing I hav'nt felt that stoned for a very long time.

Hey BadMonkey, what brand MS Contin are you using? If it is the Avinzas, I would think long and hard about banging those. They contain talc which gets deposited in your lungs and can lead to death. Its good your using a wheel filter, but still be very very careful. The fact that you passed out from that shot IS NOT GOOD!! You probably just had a small OD. You might not wake up from it next time. Be very careful brotha, we dont want you going anywhere you cant come back from.

[Bad Monkey]

O.K Firstly Caesee how dare you gudge me, I have cronic ciatica.There R days I'd rather be dead no joke.When it comes on 'Hardcore'I don't have time or paicence to 2 wait 2.5 hrs 4 da MS to come on (let alone wasting 66% of the drug oraley) I think If you walked my(oxy-acydalined flaming feet) shoes I don't think you.PLEASE don't repley to my posts if ya gona label me STUPID.I'vs been in dis Quagmire(Using)for 25yrs.gAlthough consrucktive critisysm is WELCOME!!. Regards BM P.S I'm to shit faced to answer the proper repleys (need sleep)it's taken 12hrs just to type this out.Thanks BM

[caesee]

I was not judging you, I was making a comment readrding yuor response... Didnt label or call you stupid, just said that iving the ms contin was, I now many people whom have had very bad problems aftet doing that.

[kramorph]

This is how I do it.First get at least 5 ms contin 100mgs. Use the cold water method to freebase, filter and dry morph. Water, bicarb etc.(want to try Nukes method with toluene and mineral spirits, but need toluene or suitable sub.) When drying be very care ful not to burn morph(this is where many fuck up). When morphine freebase powder is dry, transfer into suitable haet proof container(sm pyrex cup) add 1/2ml aa for every 1/2g morph. cover with foil and put in oven on lowest setting(ideally about 80*C).After an hour or so get ya H out of the oven.Gently heat to remove excess AA. You should now have nearly a mL of very very strong H(and some morph,acetic acid,water etc)Make this solution up to 10mL and then you have 10 very strong hits for the tolerant user.What my freind made this morning was excellent, better than yesterdays.Now all they need is more morph.

[Bad Monkey]

Hey Kramorph, can you PM me & break it down for me cause SWIM is not that good at reading instuctions.But so far your the one who has given hope.
Hope ta hear from yareal soon BM.

[jasongeorge@hotmail.com]

You should be getting the 100mg Morphine pills a pink/red colour when you're finished....... If not you need more practice

[shaunclo]

Originally Posted by jasongeorge@hotmail.com

You should be getting the 100mg Morphine pills a pink/red colour when you're finished....... If not you need more practice

Is anybody else confused as to what this poster is trying to say??? From what I know, the liquid that you should be left with in the syringe should be a completely clear, no particle solution. I have never heard of a pink/red color, that sounds like a mistake......anyone??

[Bad Monkey]

Woot!!
A pink red color I've never seen,its always been a light colored bayshey from morph extration.Am I understanding U right?

[shaunclo]

Yes, from my own experience, if your ending up with a redish/pinkish color, than somethings wrong. I wouldnt shoot something that color, esepcially morphine, cause pure liqiud morphine is clear in its pure form. Have I said pure enough???...........pure.........pure