Advertise on Opiophile
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 30 of 47

Thread: Preparing Morphine Sulfate 100 mg SR for IV Use

  1. #1
    OpioNoMo tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296's Avatar
    Join Date
    May 2007
    Location
    Maine
    Posts
    991

    Needle Preparing Morphine Sulfate 100 mg SR for IV Use

    Okay, so I have used the search engines on several different sites and have found so many different methods for preparation that I don't really know what to do.

    I tried just putting 50 mg in a spoon, crushing, and heating to a boil just for a short time. I sucked it up through a cotton before it gelled up too bad, and I got an INSANE rush off it (although I also had 90 mg oxycodone in there :biggrin, so I assumed that this method gets the job done, but I have a feeling it is a huge waste and I hate the idea of injecting a syrupy substance.

    Does anyone know of a tried and true method of preparing these bad boys for IV use? I have found people online suggesting "crisping" the pills dry, then adding salty water and boiling. I have found some people suggesting adding another round of cold water after the first round gels up, heating the mixture, and injecting that.

    But all the methods I saw seemed half-ass and based on trial and error by novices.

    Any advice here? Would be appreicated ASAP. And please no preaching about IVing pills.

  2. #2
    Noddin' & Moddin' mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline's Avatar
    Join Date
    Jul 2010
    Location
    New York is cold
    Posts
    2,776

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    IF that method worked, then why fuck wid it? If you got a huge rush I'm sure not much went to waste.



    BTW only 60mg of Morphine Sulfate fits in a 1cc/1ml syringe.
    “ I can’t think of anything off the top of my head that seems more important than something designed to raise money to keep something going that keeps IV drug users from dying. ” - Elliott Smith

  3. #3
    OpioNoMo tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296's Avatar
    Join Date
    May 2007
    Location
    Maine
    Posts
    991

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Exactly solubility in H2O is 67 mg per mL of H20. However, I know I am not doing it efficiently, since I can get like 4 washes off the same spoon, so I am trying to figure out a better way to fit all 60 or so mg into a single shot. I tried "crisping" the dried pill until it changed colors, shocking it with cold saline solution, and adding heat while I mix it - the idea is the hot water and salt water would help eliminate the time release material. It def worked better - it turned to a brown liquid which looked exactly like good dope, and it gelled much less.

    Thanks the info mainline, but I was looking for someone with some personal experience in the matter? Have you tried it.

  4. #4
    Occasionally Opiated Akhkharu is fresh on the scene. Akhkharu is fresh on the scene. Akhkharu's Avatar
    Join Date
    Jul 2011
    Location
    Las Vegas
    Posts
    71

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    yea, that was just the oxy working. You should look up "crisping" if you dont crisp it then you just wasted a shit ton of morphine. If you simply crush, add water, and then heat, you may get a weee little bit of morpine that didnt get absorbed into the pill matrix, but that's it. the morphine is kept within the "matrix". I'm using that word, because I don't know how else to say it. But anyways... crisp that shit, then shoot it up like normal. And that adding salty water thing is complete bullshit. I have a script for MSContins and if you don't crisp them, then you just wasted a pill. I recommend crushing, putting in a spoon. Heating until it starts turning brown, and then water shocking the spoon, JUST THE BOTTOM OF THE SPOON. to cool it down, and then repeating that a couple of times until you get a nice evenly caramel colored powder. If it catches on fire or it starts boiling a lot, then you need to start over on a new pill. It takes a little while to get the hang of, but it's not that hard. There are a few other ways to proceed after you crisp it. Personally, i like to use some citric acid or a few drops of lemon juice along with the water im going to use to shoot up. Adding this seems to add to the breakdown of the matrix. I usually add acid and water and let it sit for about 10-15 minutes and then heat it up until it is JUST BELOW BOILING to make sure most of the nasties are dead and then prep my shot and inject
    If anyone has any questions or has any additions, feel free to add :-D

  5. #5
    Opiophile Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch's Avatar
    Join Date
    May 2011
    Location
    Concord,CA (East Bay Area)
    Posts
    892

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    I know for the Endo 60mg Morphine Sulfate SRs you just bring 1 1/2cc water to rolling boil dump crushed pill into cooker hold heat just for a few more seconds then draw up through a tight cotton already affixed to your point. The solution is light orange(color of pill) and not thick at all. What remains is a little dryed out gel residue which if done right should be tasteless because you've drawn out the product from it. I can't speak for the 100s but i don't see why it wouldn't work. I've been told the SRs are much more appealing for IV users. There just what i've always been able to get a hold of the easiest.

  6. #6
    OpioNoMo tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296's Avatar
    Join Date
    May 2007
    Location
    Maine
    Posts
    991

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Quote Originally Posted by Akhkharu View Post
    yea, that was just the oxy working. You should look up "crisping" if you dont crisp it then you just wasted a shit ton of morphine. If you simply crush, add water, and then heat, you may get a weee little bit of morpine that didnt get absorbed into the pill matrix, but that's it. the morphine is kept within the "matrix". I'm using that word, because I don't know how else to say it. But anyways... crisp that shit, then shoot it up like normal. And that adding salty water thing is complete bullshit. I have a script for MSContins and if you don't crisp them, then you just wasted a pill. I recommend crushing, putting in a spoon. Heating until it starts turning brown, and then water shocking the spoon, JUST THE BOTTOM OF THE SPOON. to cool it down, and then repeating that a couple of times until you get a nice evenly caramel colored powder. If it catches on fire or it starts boiling a lot, then you need to start over on a new pill. It takes a little while to get the hang of, but it's not that hard. There are a few other ways to proceed after you crisp it. Personally, i like to use some citric acid or a few drops of lemon juice along with the water im going to use to shoot up. Adding this seems to add to the breakdown of the matrix. I usually add acid and water and let it sit for about 10-15 minutes and then heat it up until it is JUST BELOW BOILING to make sure most of the nasties are dead and then prep my shot and inject
    If anyone has any questions or has any additions, feel free to add :-D
    Does this process work for the ABGs as well as the Mallies?

  7. #7
    opiopopo LorTabitha is one bad motherfucker LorTabitha is one bad motherfucker LorTabitha is one bad motherfucker LorTabitha is one bad motherfucker LorTabitha is one bad motherfucker LorTabitha is one bad motherfucker LorTabitha is one bad motherfucker LorTabitha is one bad motherfucker LorTabitha is one bad motherfucker LorTabitha is one bad motherfucker LorTabitha is one bad motherfucker LorTabitha's Avatar
    Join Date
    Sep 2007
    Location
    a hotel
    Posts
    4,577

    Default

    My neighbor's Aunt Glenda doesn't shoot and a few mallies dropped in her lap the other day. She told me she was considering plugging but wanted me to ask y'all if there's a way other than crisping? (She's not very coordinated) Is there a way you can just put them in something overnight or anything? ?

  8. #8
    OpioNoMo tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296's Avatar
    Join Date
    May 2007
    Location
    Maine
    Posts
    991

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Quote Originally Posted by Dutch View Post
    I know for the Endo 60mg Morphine Sulfate SRs you just bring 1 1/2cc water to rolling boil dump crushed pill into cooker hold heat just for a few more seconds then draw up through a tight cotton already affixed to your point. The solution is light orange(color of pill) and not thick at all. What remains is a little dryed out gel residue which if done right should be tasteless because you've drawn out the product from it. I can't speak for the 100s but i don't see why it wouldn't work. I've been told the SRs are much more appealing for IV users. There just what i've always been able to get a hold of the easiest.
    Tried this with a Mallie 100 mg and had the worst results I've had so far trying to prepare these. Took a long time to crisp them, but when water was added it gooped up worse than ever. I am not using MSContin, I am using Morphine Sulphate Sustained Release (SR), so I don't know if this is why it didn't work.

    So far, still the best results I have obtained are crushing the pills, dissolving them in cold water, heating until it becomes less viscous, drawing up and shooting before it gets a chance to gel in the rig.

    Anyone else have methods for (specifically) 100 mg Morphine Sulfate Controlled Release (manufactured by ABG) and 100 mg Morphine Sulphate Sustained Release (manufactured my Mallinckrodt)? I would appreciate the info ASAP, it seems unbelieveable to me that with so many devoted opiophiles and drug users on the internet there isn't a single tried and true method.

    If I wanted to plus the morphine pills, would I still have to do something to removed the time-release matrix?
    Last edited by tch2296; 07-26-2011 at 10:43 AM. Reason: Added Information about Pill Manufacturer

  9. #9
    OpioNoMo ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker
    Join Date
    Nov 2009
    Location
    nine, to the universe.
    Posts
    3,071

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Quote Originally Posted by tch2296 View Post
    Tried this with a Mallie 100 mg and had the worst results I've had so far trying to prepare these. Took a long time to crisp them, but when water was added it gooped up worse than ever. I am not using MSContin, I am using Morphine Sulphate Sustained Release (SR), so I don't know if this is why it didn't work.

    So far, still the best results I have obtained are crushing the pills, dissolving them in cold water, heating until it becomes less viscous, drawing up and shooting before it gets a chance to gel in the rig.

    Anyone else have methods for (specifically) 100 mg Morphine Sulfate Controlled Release (manufactured by ABG) and 100 mg Morphine Sulphate Sustained Release (manufactured my Mallinckrodt)? I would appreciate the info ASAP, it seems unbelieveable to me that with so many devoted opiophiles and drug users on the internet there isn't a single tried and true method.

    If I wanted to plus the morphine pills, would I still have to do something to removed the time-release matrix?
    i have had extensive experience prepping these pills. i poweder mine after i take the shell off with a emeryboard or you fingernail. then place into spoon with NO water. heat spoon until it turns pretty dark brown. it will look nasty, but this is how it is. do no add water until it is all brown,,, then prep like a normal shit. your gonna get a huge pins and needles rush from doing it right, you will know.

  10. #10
    OpioNoMo tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296's Avatar
    Join Date
    May 2007
    Location
    Maine
    Posts
    991

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Quote Originally Posted by ausativa View Post
    i have had extensive experience prepping these pills. i poweder mine after i take the shell off with a emeryboard or you fingernail. then place into spoon with NO water. heat spoon until it turns pretty dark brown. it will look nasty, but this is how it is. do no add water until it is all brown,,, then prep like a normal shit. your gonna get a huge pins and needles rush from doing it right, you will know.
    Were you using the ABG's or the Mallies? Because I used this method with the mallies and it gelled up like a motherfucker. Sure, I was able to get a hit off of it, but I had to inject a disgusting syrupy substance, and it was incredibly inefficient. It didn't seem to be destroying the gel-like material since it still turned to a nasty goop. Did I not brown the powder long enough? I just waited until it was a light caramel color because I didn't want to burn any of the morphine off.

  11. #11
    OpioNoMo ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker
    Join Date
    Nov 2009
    Location
    nine, to the universe.
    Posts
    3,071

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    these?

    yeah these are the ones, although they were the orange 60 mg. i have crisped both mallies and abgs. just heat with no water.. you put water in after your done.. and dont let it sit around.. when you stir it, there is still a small peice of crisped remains that wont dissolve. this is ok, there non water soulable materials still in there. just crisp, add water, stir, draw through filter, and shoot.

  12. #12
    OpioNoMo tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296's Avatar
    Join Date
    May 2007
    Location
    Maine
    Posts
    991

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Quote Originally Posted by ausativa View Post
    these?

    yeah these are the ones, although they were the orange 60 mg. i have crisped both mallies and abgs. just heat with no water.. you put water in after your done.. and dont let it sit around.. when you stir it, there is still a small peice of crisped remains that wont dissolve. this is ok, there non water soulable materials still in there. just crisp, add water, stir, draw through filter, and shoot.
    Yes those are the ones. The person who gave me instructions before said to let the solution sit for 10-15 minutes after adding water to the crisped powder. You think that was causing the problem? Thanks for helping out man.

  13. #13
    OpioNoMo ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker
    Join Date
    Nov 2009
    Location
    nine, to the universe.
    Posts
    3,071

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    yeah that is what has caused me issues in the past as well. good luck good sir.

  14. #14
    Never Looked Back Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect's Avatar
    Join Date
    Sep 2010
    Location
    Limbo
    Posts
    2,316

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Well, I know what has worked for me in the past with endos is to go ahead and let them gel, wait for it all to be in the gel, no chunks or anything, and then boil your goop. There will be a "skin"-like film at the top. Scrape that off and your goods are below, with the consistency of water. Best rush of any method ime. I just am not sure if it works for more than endos but I don't see why it wouldn't. . .

  15. #15
    Opiophile Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch's Avatar
    Join Date
    May 2011
    Location
    Concord,CA (East Bay Area)
    Posts
    892

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use



    These are the SR Endos i work with and the rolling boil quick draw method works just fine every time. You get a coooool rush off hit 1 and 1 or 2 washes and then the remaining goop has no taste and you know you've gotten all the goods out of it.

    Im still not sure why there is a need for both ER and SR formulations of this drug. What is the difference?

  16. #16
    Never Looked Back Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect's Avatar
    Join Date
    Sep 2010
    Location
    Limbo
    Posts
    2,316

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Quote Originally Posted by Dutch View Post


    These are the SR Endos i work with and the rolling boil quick draw method works just fine every time. You get a coooool rush off hit 1 and 1 or 2 washes and then the remaining goop has no taste and you know you've gotten all the goods out of it.

    Im still not sure why there is a need for both ER and SR formulations of this drug. What is the difference?
    yep, SWIM is picking up some more of those exact delicacies this afternoon. Says she's heard people say they hate this brand but she fails to see why. No coating, lotsa ways to do it. meh, their loss.

    SWIM isn't supposed to be doing this, but h has been few and far between lately. What she's found was shit and had to be worse for her veins than this.

  17. #17
    Opiophorum Member herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about
    Join Date
    Feb 2011
    Location
    Australia
    Posts
    155

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Cooking pills...
    Enjoy your heart and lung problems guys, read the sticky.

  18. #18
    Never Looked Back The Ryan is one bad motherfucker The Ryan is one bad motherfucker The Ryan is one bad motherfucker The Ryan is one bad motherfucker The Ryan is one bad motherfucker The Ryan is one bad motherfucker The Ryan is one bad motherfucker The Ryan is one bad motherfucker The Ryan is one bad motherfucker The Ryan is one bad motherfucker The Ryan is one bad motherfucker The Ryan's Avatar
    Join Date
    Nov 2007
    Location
    redundancy
    Posts
    3,645

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Endos are the easiest to prep IMO

    these grey 100 with the M on them are just hell, I couldn't find a good way.
    It is the deepest darkness that a light shines the brightest.

  19. #19
    Opiophile Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch's Avatar
    Join Date
    May 2011
    Location
    Concord,CA (East Bay Area)
    Posts
    892

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Waiting with baited breath for my connect to greenlight more of those Orange Dreams. SWIM gets em for $4 and feels like its a god damn steal.

  20. #20
    Noddin' & Moddin' mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline is ██  ████ (censored by Opiophile, they are just too awesome) mainline's Avatar
    Join Date
    Jul 2010
    Location
    New York is cold
    Posts
    2,776

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Quote Originally Posted by Disconnect View Post
    Well, I know what has worked for me in the past with endos is to go ahead and let them gel, wait for it all to be in the gel, no chunks or anything, and then boil your goop. There will be a "skin"-like film at the top. Scrape that off and your goods are below, with the consistency of water. Best rush of any method ime. I just am not sure if it works for more than endos but I don't see why it wouldn't. . .

    That is the WORST method IME! I used to do thatand I hate it now.


    I like the superfast podwer boil draw up and boom.





    ALSO OP, i dont think your MScontin ( MS SR, same thing, different manufactuer I assume. Generic MScontin says Morphine Sulfate SR or ER right? AMICRAZY? 4mg xanax, no benzo tolly. all wild and relaxed) should ever be anything but clear. Definately not light brown/iced tea color. UNLESS its a colored pill, (V roxis, for example) You compared with the color of dope, but dope is that colour cause it isn't pure, the MS is. Pure H is completely clear, water colored, as im sure you knw.




    anyay, th method i mentioned above is popular here and my personal fave.
    “ I can’t think of anything off the top of my head that seems more important than something designed to raise money to keep something going that keeps IV drug users from dying. ” - Elliott Smith

  21. #21
    OpioNoMo borohydride is one bad motherfucker borohydride is one bad motherfucker borohydride is one bad motherfucker borohydride is one bad motherfucker borohydride is one bad motherfucker borohydride is one bad motherfucker borohydride is one bad motherfucker borohydride is one bad motherfucker borohydride is one bad motherfucker borohydride is one bad motherfucker borohydride is one bad motherfucker
    Join Date
    May 2007
    Location
    UK
    Posts
    3,411

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Quote Originally Posted by mainline View Post
    BTW only 60mg of Morphine Sulfate fits in a 1cc/1ml syringe.
    If you use plain water. If you buffer the pH appropriately, you can get 92-93mg of morphine sulfate to dissolve in 1cc of water. I've already posted the appropriate patent. It's not hard, just a sprinkle of ammonium acetate or such...

  22. #22
    OpioNoMo tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296's Avatar
    Join Date
    May 2007
    Location
    Maine
    Posts
    991

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Quote Originally Posted by mainline View Post
    That is the WORST method IME! I used to do thatand I hate it now.


    I like the superfast podwer boil draw up and boom.





    ALSO OP, i dont think your MScontin ( MS SR, same thing, different manufactuer I assume. Generic MScontin says Morphine Sulfate SR or ER right? AMICRAZY? 4mg xanax, no benzo tolly. all wild and relaxed) should ever be anything but clear. Definately not light brown/iced tea color. UNLESS its a colored pill, (V roxis, for example) You compared with the color of dope, but dope is that colour cause it isn't pure, the MS is. Pure H is completely clear, water colored, as im sure you knw.




    anyay, th method i mentioned above is popular here and my personal fave.
    Yeah, but if you crisp the morphine, the solution turns the same color as the crisped powder - brown. I guess I'll try your method from now on. How much time do you think you have between when you add the water and when you need to bang the solution?

  23. #23
    OpioNoMo tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296's Avatar
    Join Date
    May 2007
    Location
    Maine
    Posts
    991

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    God damn dude, I just tried preparing about 60 mg (couple leftover pieces off of the 100 mg Morphine Sulfate SR), this time by crisping the dry powder (after crushing it up really fine) until at least 50% of the powder had turned brown. Any more than that and it feels like (and smells like) I am just burning/destroying the morphine. In the past, I only heated until I saw the first wisps of smoke because that's what I was told by a pillhead acquaintance of mine.

    This time, after crisping, I quickly added 1.5 mL water, which "shocked" the solution, making a hissing noise and immediately causing the solution to turn the color of motor oil (or black tar heroin, lol). This time I did NOT immediately heat the solution after adding the water. I dropped a big cotton in right away, and struggled to pull anything up into the rig. The solution was still thick and goopy, WTF. After only being able to get pull around 15 units of the goop/solution into my rig, I added another 80 units of water, and heated for a second or two until it was about to boil.

    After adding more water and heating the goopy mess, and adding a second cotton which wasn't completely coated in gel, I was able to pull back about 80 units from the spoon (could have got more, knew I wouldn't need it though, and I'll be able to get a fat hit off that spoon again).

    At first, I squirted a tiny bit of the morphine "solution" (which looked remarkably like black tar in the rig) onto my hand because I am not entirely comfortable squirting something the consistency of Karo syrup into my veins. It barely even came out, it like fizzed and bubbled out, which worried me. However, being the junkie I am, I was able to register and fire away. BAAAAMMMMMM this shit hits me like a ton of bricks. Pins and motherfucking needles, a more intense rush than any opiate I have done. And I shot 20 mg of oxymorphone IR yesterday. I only put 55-60 mg in the spoon, and the preparation was so shitty I wouldn't imagine I got any more than 30 mg into the rig.

    So my question for ausativa is what did I do wrong? I mean yeah I got high as shit but it was a fucking mess, the solution was thick as oil, it was just bad. If I crisp the powder even more would that remove the gelling portion? How do I know I'm not just destroying good morphine?

    The crisping doesn't seem to be doing anything to break the time release matrix - when I first got these I didn't even know what crisping was and still got a huge rush off 50 mg by just crushing, boiling, and drawing it up before it cooled down. It seems to make even more of a mess when I use the crisping method and it's harder to get the morphine out of the goop.

    I still can't believe that there isn't a tried-and-true, agreed-upon method for banging morphine pills, especially in this community. It's morphine for fuck's sake! I never had half as much trouble with a good old OC 80.

  24. #24
    Opiophorum Member herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about
    Join Date
    Feb 2011
    Location
    Australia
    Posts
    155

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Oh man, hearing all this talk of boiling pill solutions and injecting them is making me cringe, read through my started threads, you guys are doing serious damage to yourselves.

  25. #25
    OpioNoMo ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker ausativa is one bad motherfucker
    Join Date
    Nov 2009
    Location
    nine, to the universe.
    Posts
    3,071

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Quote Originally Posted by tch2296 View Post
    God damn dude, I just tried preparing about 60 mg (couple leftover pieces off of the 100 mg Morphine Sulfate SR), this time by crisping the dry powder (after crushing it up really fine) until at least 50% of the powder had turned brown. Any more than that and it feels like (and smells like) I am just burning/destroying the morphine. In the past, I only heated until I saw the first wisps of smoke because that's what I was told by a pillhead acquaintance of mine.

    This time, after crisping, I quickly added 1.5 mL water, which "shocked" the solution, making a hissing noise and immediately causing the solution to turn the color of motor oil (or black tar heroin, lol). This time I did NOT immediately heat the solution after adding the water. I dropped a big cotton in right away, and struggled to pull anything up into the rig. The solution was still thick and goopy, WTF. After only being able to get pull around 15 units of the goop/solution into my rig, I added another 80 units of water, and heated for a second or two until it was about to boil.

    After adding more water and heating the goopy mess, and adding a second cotton which wasn't completely coated in gel, I was able to pull back about 80 units from the spoon (could have got more, knew I wouldn't need it though, and I'll be able to get a fat hit off that spoon again).

    At first, I squirted a tiny bit of the morphine "solution" (which looked remarkably like black tar in the rig) onto my hand because I am not entirely comfortable squirting something the consistency of Karo syrup into my veins. It barely even came out, it like fizzed and bubbled out, which worried me. However, being the junkie I am, I was able to register and fire away. BAAAAMMMMMM this shit hits me like a ton of bricks. Pins and motherfucking needles, a more intense rush than any opiate I have done. And I shot 20 mg of oxymorphone IR yesterday. I only put 55-60 mg in the spoon, and the preparation was so shitty I wouldn't imagine I got any more than 30 mg into the rig.

    So my question for ausativa is what did I do wrong? I mean yeah I got high as shit but it was a fucking mess, the solution was thick as oil, it was just bad. If I crisp the powder even more would that remove the gelling portion? How do I know I'm not just destroying good morphine?

    The crisping doesn't seem to be doing anything to break the time release matrix - when I first got these I didn't even know what crisping was and still got a huge rush off 50 mg by just crushing, boiling, and drawing it up before it cooled down. It seems to make even more of a mess when I use the crisping method and it's harder to get the morphine out of the goop.

    I still can't believe that there isn't a tried-and-true, agreed-upon method for banging morphine pills, especially in this community. It's morphine for fuck's sake! I never had half as much trouble with a good old OC 80.
    well, this is kinda the tried and true method. dont worry about burning the morphine. it really does take a lot. yes i said it will turn brown and look disgusting. when it is "half brown" you did not crisp it all the way brother. the ENTIRE thing. portions that are not brown are not crisped. big thanks to big pharma, for having our best intrests in mind, and for making it as dangerous as possible to break down pills. many many pills have anti-abuse measures. if it bothers you so much, buy some heroin dude. if it doesnt.. shoot the shit up, thats all there is to it man. but did i, or did i not call that you would get a hella rush off of it?

  26. #26
    OpioNoMo tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296 is a glorious beacon of light tch2296's Avatar
    Join Date
    May 2007
    Location
    Maine
    Posts
    991

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    I bought an $80 bag of good dope today, did the whole thing (kinda dumb) and it did NOTHING to me. Everyone else was FLOORED off $20, it was amazing shit, dissolved perfectly, etc. Does morphine like jack your tolerance up? Meanwhile 50 mg morphine gets me a HUGE rush.

    --- auto merge ---

    Quote Originally Posted by herm1t View Post
    Cooking pills...
    Enjoy your heart and lung problems guys, read the sticky.
    No offense but enough with this shit man. We all know the risks of injecting pills, I am a fucking heroin addict and have been one for years. I've banged everything from 5 mg amphetamine sulphate pills (literally yellow sludge), to klonopins and xanax, to ambiens and other things that jsut aren't worth banging. Why do I do it? Same reason I shoot heroin, oxy, and morphine despite the potentially devastating effects on my personal life.

    "People think it's all about misery and desperation and death and all that shit which is not to be ignored, but what they forget is the pleasure of it. Otherwise we wouldn't do it. After all, we're not fucking stupid. At least, we're not that fucking stupid." - Mark Renton

    Post something more interesting somewhere else, maybe it won't make you "cringe". I know this fat hit of morphine will have me cringing with joy, so I'm set man.

    --- auto merge ---

    Yo Dutch I see ur online and I hope you see this. Sorry mods but why can't I PM someone that's online it's kinda annoying esp since I need the info ASAP. For the ABG 100's, I know you said to just add salt water to avoid gelling, but do you still crisp them?

  27. #27
    Opiophorum Member herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about
    Join Date
    Feb 2011
    Location
    Australia
    Posts
    155

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Quote Originally Posted by tch2296 View Post
    I bought an $80 bag of good dope today, did the whole thing (kinda dumb) and it did NOTHING to me. Everyone else was FLOORED off $20, it was amazing shit, dissolved perfectly, etc. Does morphine like jack your tolerance up? Meanwhile 50 mg morphine gets me a HUGE rush.

    --- auto merge ---



    No offense but enough with this shit man. We all know the risks of injecting pills, I am a fucking heroin addict and have been one for years. I've banged everything from 5 mg amphetamine sulphate pills (literally yellow sludge), to klonopins and xanax, to ambiens and other things that jsut aren't worth banging. Why do I do it? Same reason I shoot heroin, oxy, and morphine despite the potentially devastating effects on my personal life.

    "People think it's all about misery and desperation and death and all that shit which is not to be ignored, but what they forget is the pleasure of it. Otherwise we wouldn't do it. After all, we're not fucking stupid. At least, we're not that fucking stupid." - Mark Renton

    Post something more interesting somewhere else, maybe it won't make you "cringe". I know this fat hit of morphine will have me cringing with joy, so I'm set man.

    --- auto merge ---

    Yo Dutch I see ur online and I hope you see this. Sorry mods but why can't I PM someone that's online it's kinda annoying esp since I need the info ASAP. For the ABG 100's, I know you said to just add salt water to avoid gelling, but do you still crisp them?
    Injecting benzos? hahahahahaahhahahahahahahahahahahahahahahaahahahah ahahahahahahahahahahahahaha

    as for the rest, are you mad that someone is making you wake up to the ill effects? You dont want to think about them do you, ill post whatever fucking harm reduction I want in any relevant fucking thread, and theres nothing you can do to stop me, so cry more. So until you get wheel filters, enjoy those permanent health problems that can be easily an efficiently avoided!

  28. #28
    Opiophile Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch is a glorious beacon of light Dutch's Avatar
    Join Date
    May 2011
    Location
    Concord,CA (East Bay Area)
    Posts
    892

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Hey Herm1t i know you think your up on things but the Endo brand SRs i mentioned in this thread require no crisping, and adding the non crisped powder to boiling water results in a thin watery translucent orange pull through a tightly rolled cotton. There is no particulate matter or sludge in the rig. My method for the ABGs also requires no heat or "crisping" and again yeilds a clear particle free non thick solution. My veins and skin are as healthy as can be. So please STFU.

  29. #29
    Never Looked Back Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect is ██  ████ (censored by Opiophile, they are just too awesome) Disconnect's Avatar
    Join Date
    Sep 2010
    Location
    Limbo
    Posts
    2,316

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Quote Originally Posted by herm1t View Post
    Injecting benzos? hahahahahaahhahahahahahahahahahahahahahahaahahahah ahahahahahahahahahahahahaha

    as for the rest, are you mad that someone is making you wake up to the ill effects? You dont want to think about them do you, ill post whatever fucking harm reduction I want in any relevant fucking thread, and theres nothing you can do to stop me, so cry more. So until you get wheel filters, enjoy those permanent health problems that can be easily an efficiently avoided!
    "you mad"?
    "cry more"?
    oh please.
    I believe that you, sir, are on the wrong forum.
    are you our guardian angel or a 12 year old just discovering /b/?
    because the line here seems a little blurry
    and I'm dead sober!

    telling us once or twice is good harm reduction -- you're right to that effect.
    harping about it obsessively, however, is absurd.
    you're making yourself look like a preacher and a fool.
    like Dutch said, there are many methods that yield a non-sludgy, translucent or even crystal clear solution.
    fuck you and the high (but apparently not from IV'd pills, huh?) horse you rode in on.
    go yell at the people shooting tar. fuck knows it's worse.

    what's your deal anyway, did a pill shooter rape yer grandma?
    you care *entirely* too much.
    maybe you really are just a shit-stirrer.

    oh, and dude?
    ur doin it wrong.
    It's always better to do the whole "you mad" thing with funny reaction images.
    like so:


    of course my cute reaction image would be him.

  30. #30
    Opiophorum Member herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about herm1t has a spectacular aura about
    Join Date
    Feb 2011
    Location
    Australia
    Posts
    155

    Default Re: Preparing Morphine Sulfate 100 mg SR for IV Use

    Quote Originally Posted by Dutch View Post
    Hey Herm1t i know you think your up on things but the Endo brand SRs i mentioned in this thread require no crisping, and adding the non crisped powder to boiling water results in a thin watery translucent orange pull through a tightly rolled cotton. There is no particulate matter or sludge in the rig. My method for the ABGs also requires no heat or "crisping" and again yeilds a clear particle free non thick solution. My veins and skin are as healthy as can be. So please STFU.
    Your veins and skin are not the health issue when it comes to shooting pills, I wouldn't have replied acting like a dickhead if he hadn't done the same to me. SO PLS STFU HURRR.
    Quote Originally Posted by Disconnect View Post
    "you mad"?
    "cry more"?
    oh please.
    I believe that you, sir, are on the wrong forum.
    are you our guardian angel or a 12 year old just discovering /b/?
    because the line here seems a little blurry
    and I'm dead sober!

    telling us once or twice is good harm reduction -- you're right to that effect.
    harping about it obsessively, however, is absurd.
    you're making yourself look like a preacher and a fool.
    like Dutch said, there are many methods that yield a non-sludgy, translucent or even crystal clear solution.
    fuck you and the high (but apparently not from IV'd pills, huh?) horse you rode in on.
    go yell at the people shooting tar. fuck knows it's worse.

    what's your deal anyway, did a pill shooter rape yer grandma?
    you care *entirely* too much.
    maybe you really are just a shit-stirrer.

    oh, and dude?
    ur doin it wrong.
    It's always better to do the whole "you mad" thing with funny reaction images.
    like so:


    of course my cute reaction image would be him.
    get the fuck out of here, like I ever gave a fuck that you think I give *TOO* much harm reduction. I shoot pills all the fucking time so I dont have anything against them, I didn't ride in on any high-horse, if anyone took my ORIGINAL post the wrong way, then I apologize, but not for the following posts. The more people who are convinced to use wheel filters, the better imo.


+ Reply to Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts