IM'ing MS-Contins

[paesan]

I was just wondering how bad it actually is to IM the new MS-Contins (the ones that gel). I found that doing it this way works a whole lot better than eating or sniffing them, and I'm not so sure about using the beautifully coined "brown" method no matter how well it works. I try to keep things out of my ass as much as I can. Anyway I've done this probably 30 or so times and I haven't had any problems yet, but I was curious as to what damage I may be doing.

Paesan

[floger]

so you smash it, add sterile water, and put the gel in a muscle?

And you don't have any inflamation at injection site??

[miosis]

good luck with those abcesses....

[jacky]

I personally wouldnt IM anything unless that is the theraputic protocol, I never Im'd heroin on purpose. I would imagine that you might be stimulating some cysts to form...if your solution is hot enough initially you may not risk an absess from bacterial infection, but an absess is probably possible from the additives to the pills at some point I would think. a cyst is probably more likely.............I am not saying that IV is any better as far as health is concerned.

[paesan]

so you smash it, add sterile water, and put the gel in a muscle?

And you don't have any inflamation at injection site??

Exactly. I haven't had any swelling but I have had minor pain that lasted maybe 24 hours. Nothing compared to the steroids I've done in the past. Those caused abscesses that lasted weeks and were so painfull I couldn't sit down on the injection side for 3-4 days, and couldn't walk right for at least a day. At least I think those were abscesses, they went away on their own even though I continued injecting in the same areas for about 12 weeks straight. They were just very, very painful. With the MS-Contins there is almost nothing (in so far as pain or swelling), and I've IM'd 4-5 times in a 24hr period.

[1badrabbit]

Steriod injections can be very painful because of the high BA content in some of the solutions. Especially Testosterone Suspension and a lot of the cheaper homebrew brands. The actual brand name amps like organon's original deca durabolin and such generally have lower BA content. When the injection site develops a hot swollen lump that is painful there is a chance its an abscess. But if its discharging pus or fluid, and stinks badly the chance is very good its an abscess.

[paesan]

Steriod injections can be very painful because of the high BA content in some of the solutions. Especially Testosterone Suspension and a lot of the cheaper homebrew brands. The actual brand name amps like organon's original deca durabolin and such generally have lower BA content. When the injection site develops a hot swollen lump that is painful there is a chance its an abscess. But if its discharging pus or fluid, and stinks badly the chance is very good its an abscess.

Yep I did the cheap ass Mexican veterinary test 400. It left the injection site (generally the side of my ass, thighs and shoulders were just way too painful) unbelievably sore, so sore sometimes that I could barely walk for a couple days. Plus it left a baseball size lump that I could still feel for weeks afterwards. I kept telling my girlfriend that it was a spider bite, but that didn't work for long. A new spider bite, every week, on a different ass cheek, just a little strange, no?

[1badrabbit]

Yah that sounds like it was due to a high BA content in the test you were using. Also did you make sure and use the correct needles as far as length/gauge goes? One thing that can help with the lumps is putting a hot compress on them 2-3 times a day. www.anabolex.com is a great site for gear and there is tons of information there to help you get rid of/prevent the lumps.

[floger]

I will pass IMing the gel MScontin

[paesan]

Yah that sounds like it was due to a high BA content in the test you were using. Also did you make sure and use the correct needles as far as length/gauge goes? One thing that can help with the lumps is putting a hot compress on them 2-3 times a day. www.anabolex.com (http://www.anabolex.com/) is a great site for gear and there is tons of information there to help you get rid of/prevent the lumps.

The needles that I was using were 20 gauge 1 1/4in. I had 22 1/2 gauge 1 1/4in at first but the test was so thick it took literally 30 seconds to inject an ml so I went bigger.

Thanks for the site bro, it looks good.