SWIM has 10-30mg ABG MS-Contins. What ot do?

[krinkov]

SWIM has 10 of the red 30mg ABG brand MS-Contins. SWIM is an IV user and would like to IV these. But, SWIM only has 1cc rigs with pins. The 3cc rigs he has don't have pins. So, can SWIM get all 10 of these into a 1cc rig, or is this going to require multiple shots.

Thanks!!
Krinkov

[lotus]

multiple shots. other readers can call it shit, but when it's all you have, it's all you have.

up here, we don't have 18 different brands.....what the names are i have zero clue - canadian brand name ms contin, purple shell.

the most - and i do mean most - that i could ever manage in a 1cc rig was something between 2 and 3 per rig, with a whole lotta left overs. mostly i found it was too much of a thick and goopy hassle, so i'd just bang them one after the other.

[StackBundles]

Use cold ass water when you prep those. You'll avoid the dreaded "gooping".

I have gotten 5 of those in a one mil rig. Make sure that they are crushed as finely as possible before they go into the spoon. Use about 150 units of freezing cold water. Use a fairly decent sized cotton when you draw them up. Or you could use an oral syringe to draw them up... Then squirt the solution back into the spoon and redraw into your one mil rig, refiltering.

Anyways, that's about what I do when I have those AGB's.

[Moorefeen]

These are the ones I get every month, except mine are 60mg. These are the only generic brand that DO NOT gel up without heat. I use bottled room temp water, wash coating off, let dry for a few min, then crush them in a spoon. Add water, stir vigorously for about 3-4 min depending on how patient you are hehe, then draw up through cotton. I use 3ml rigs so my rule of thumb is to use one ml for each pill. I drop the cotton in and then draw into the rig without the point on. I always re-filter, but its always crystal clear the first time around. If you wanted I'm sure you could do 2 of these in a one mil rig but you might not get all of the goods anyway...I'd do as suggested and use one at a time, one after the other. I do all other brands this same exact way, except with the added step of heating the water to a boil briefly BEFORE dropping in the powder. Remove the plain water from the heat after it starts to boil, immediately set the spoon down then quickly drop in the powder, cotton, and draw up before it cools to wax. Works every time.

MF