asaqwert
04-05-2006, 11:46 PM
Hi all, i have a few questions
Someone Who I Met (SWIM) has procured a small amount of acetic anhydride and has some morphine sulphate pills
he has a few questions, which i will ask
does the morphine sulphate need to be converted to HCL or Citrate or the free base or anything else? if so, what one? can i free base morphine sulphate by using sodium hydroxide? is there any chance of the morphine free base being soluble in the sodium hydroxide solution, i have read that morphinate "salts" (right word?) are soluble in high pH solutions, i'm not sure if it is true, and if sodium morphenate counts for that (if sodium morphenate is even made)
can the morphine sulphate pills just be crushed and soaked/cooked with acetic anhydride before getting rid of the fillers? i would think it wouldn't matter and that things would work just fine, then afterwards you can filter it out (the heroin is more soluble in water anyways, so it should filter better)
if they can't be just acetylated, how can one extract the morphine from M Eslon pills (time relase gelcaps with little beads inside, they are NOT the MS CONTINS)? is there any relatively easy way? i have a few stronger bases and sodium bicarbonate, as well as hcl acid, H2SO4, citric acid, acetic acid, and a few other chemicals....nothin too crazy exect the AA (swim, of course, has all of this stuff)
any hints or tips or anything as far as converting my stuff to good stuff, and any easy ways?
what i've done already once is i made a normal morphine solution like i do (i use some hcl in hopes that i'm converting some/lots of the moprhine to the hcl salt, i know when i do this, the solution is much clearer after filtering, and it can dissolve in much less water (morphine hcl is much more soluble in water than h2so4) and then dried this out. the problem is, it took like 2 days to dry out.....
i then put in some aa, let it sit for a while after stirring then cooked it for a bit till there was no liquid left, then put some water in, put some bicarbonate in to neutralize the acetic acid, then put in some citric acid to make heroin citrate, then filtered twice and shot half of what i got (i started with about 180 mg of morphine....)
after shooting half of half, i astarted feeling a pretty good warm feeling (much better than morphine ever has) so i put some more in, but saved just under half, pulled out and sat back, felt fuckin great but decided iw asn't gonna od myself so i went to put in the rest, which wasn't as easy getting a vien (mine are kind of fucked, just hard to hit naturlaly so when they get fucked its gay) and when i finally did in my hand, it didn't seem to even work that wlel (i assume cuz iw as already high...) and i didn't feel alot, but my hand got sore for an hour
anyways, any hints or tips? i'm sure i made some heroin there, if not a fair bit....i want to try something different though to get a better yeidl (i shoudl be able to get at least two GOOD shots from acetylating 200 mg of morphine....definetly)
thanks all for your help
Someone Who I Met (SWIM) has procured a small amount of acetic anhydride and has some morphine sulphate pills
he has a few questions, which i will ask
does the morphine sulphate need to be converted to HCL or Citrate or the free base or anything else? if so, what one? can i free base morphine sulphate by using sodium hydroxide? is there any chance of the morphine free base being soluble in the sodium hydroxide solution, i have read that morphinate "salts" (right word?) are soluble in high pH solutions, i'm not sure if it is true, and if sodium morphenate counts for that (if sodium morphenate is even made)
can the morphine sulphate pills just be crushed and soaked/cooked with acetic anhydride before getting rid of the fillers? i would think it wouldn't matter and that things would work just fine, then afterwards you can filter it out (the heroin is more soluble in water anyways, so it should filter better)
if they can't be just acetylated, how can one extract the morphine from M Eslon pills (time relase gelcaps with little beads inside, they are NOT the MS CONTINS)? is there any relatively easy way? i have a few stronger bases and sodium bicarbonate, as well as hcl acid, H2SO4, citric acid, acetic acid, and a few other chemicals....nothin too crazy exect the AA (swim, of course, has all of this stuff)
any hints or tips or anything as far as converting my stuff to good stuff, and any easy ways?
what i've done already once is i made a normal morphine solution like i do (i use some hcl in hopes that i'm converting some/lots of the moprhine to the hcl salt, i know when i do this, the solution is much clearer after filtering, and it can dissolve in much less water (morphine hcl is much more soluble in water than h2so4) and then dried this out. the problem is, it took like 2 days to dry out.....
i then put in some aa, let it sit for a while after stirring then cooked it for a bit till there was no liquid left, then put some water in, put some bicarbonate in to neutralize the acetic acid, then put in some citric acid to make heroin citrate, then filtered twice and shot half of what i got (i started with about 180 mg of morphine....)
after shooting half of half, i astarted feeling a pretty good warm feeling (much better than morphine ever has) so i put some more in, but saved just under half, pulled out and sat back, felt fuckin great but decided iw asn't gonna od myself so i went to put in the rest, which wasn't as easy getting a vien (mine are kind of fucked, just hard to hit naturlaly so when they get fucked its gay) and when i finally did in my hand, it didn't seem to even work that wlel (i assume cuz iw as already high...) and i didn't feel alot, but my hand got sore for an hour
anyways, any hints or tips? i'm sure i made some heroin there, if not a fair bit....i want to try something different though to get a better yeidl (i shoudl be able to get at least two GOOD shots from acetylating 200 mg of morphine....definetly)
thanks all for your help