View Full Version : Avinza (morphine sulfate)
sidman
08-21-2007, 01:19 PM
I have two 30 mg capsules of Avinza (MS) They have slow release and instant release beads mixed together in each capsule
If I'm not mistaken, these can be injected right?
Just plain water should be enough or should I also heat it up a little too?
CIIORNOTHING
08-21-2007, 03:11 PM
I have two 30 mg capsules of Avinza (MS) They have slow release and instant release beads mixed together in each capsule
If I'm not mistaken, these can be injected right?
Just plain water should be enough or should I also heat it up a little too?
Some do, some dont. I crush my little beads then heat mine just until its barely about to bubble. Too much heat will ruin it. And bang away. I get a great rush from mine.....when I can get them. I missed a few doc appts like a dumb ass and my doc started me back on square one and gave my Ultracet. Im so stupid......
jacky
08-22-2007, 12:18 PM
dont avinza's have talc in them?
might want to check, injecting talc is a losing battle in the end....nothing you want to do on a regular basis.
think lung damage.
probably the most powerful way to take MS besides injection is in the anus.
I keep MS in my lip till it totally dissolves, I think its a better way than just swallowing and relying on poor oral bioavialability, at least you are bathing your mucous membranes in morphine and possibly getting some buccal absorption
Junkhead
08-22-2007, 01:35 PM
if your not the one that might be doing the morphine, please excuse my post.
im not trying to be invasive, but do you really want to do these? maybe if you
think about everything, go for a walk, exercise, write a poem, draw, any or all
of the things you discovered about yourself while you were sober in jail. i just
wouldnt want anyone to make a quick decision and relapse and get back on that
life, over a bad day or bad craving or whatever caused it because maybe if you
wait 2 hours you'll feel differently. SWIM made that quick decision to use many times and
many times she wished she wouldnt have done it immediately after, but just as many times
she didnt regret it, and whether she regreted it or not it never failed to make her feel better
for at least those few hours.
giving in to morphine just this once could lead to another 5 years of using.
im just saying maybe you should really think hard about this and weigh the pros and
cons of the situation. if you can just use every now and then, thats great.
as for the question you asked, from what i've read on here i believe the way to go about
iving them is to crisp them first, or if you have enough time some say the ''ike method'' is
better because it illiminates the risk of heat destroying the morphine. ive never tried
either way myself though so i cant offer any personal experience, but i suggest you do
a search for 'crisping' and that should bring up the ike method as well.
whatever you decide to do i hope it works out for ya.
CIIORNOTHING
08-22-2007, 03:08 PM
dont avinza's have talc in them?
might want to check, injecting talc is a losing battle in the end....nothing you want to do on a regular basis.
think lung damage.
probably the most powerful way to take MS besides injection is in the anus.
I keep MS in my lip till it totally dissolves, I think its a better way than just swallowing and relying on poor oral bioavialability, at least you are bathing your mucous membranes in morphine and possibly getting some buccal absorption
This is true, but thats why I buy whatman syringe filters from the web. The .20 and .45 micron filter out EVERYTHING. You basically are doing a cold sterilization with the .20 filter. Glue, binders, talc, bacteria, etc, anything not 100% water soluble gets caught in the filter. They run you about five bucks a peice but can be used more than once and its totally worth it.
I buy mine as well as my rigs at www.getpinz.com (http://www.getpinz.com)
BLOODY
09-07-2007, 08:59 AM
sidman,thank u sooo much wit da whatman filter advice,chewing off my fingernails waitin for dem to arrive.
u know if they filter watersluble polys too?and does much m. get filterd out?answer would be very kind of u.ever heard of millexGP s.filt.,they also 0.2mic.an look da same.they any good.anyone who knows PLEASE help.gotta nod now.yours truly,bloody(constantly opiated )
BLOODY
09-25-2007, 06:07 AM
sorry,meant cIIornothing.u are absolutely correct,tip of da hat goes to u bro!
--------------------------------------------------------------------
P.S.your avatar RULES.they used to sell dat same pic in amsterdam 18years ago.on t-shirts.my
buddy(R.I.P.)used to wear it alla time.i didnt buy one,thought it was too much of a giveaway fo
da cops.cIIornothing,i meant u of course,ur advice was great help,tip of da hat to you,bro.
CIIORNOTHING
10-01-2007, 01:28 PM
Sorry Ive taken so long to reply, but if you go with the .20 micron (i think thts right, its the smaller of the ones available) it is for water based solutions. The .45 is for oil based.
The .20 gets out everything and I mean everything. BUT, once you push it so much, you will start seeing some cloudyness come through. You cant over use them or push too hard or your pushing shit through the filter that shouldnt be. Just gentle pressure, and when it wont come out anymore, you need a new filter.
StillChippin
10-01-2007, 05:47 PM
P.S.your avatar RULES.they used to sell dat same pic in amsterdam 18years ago.on t-shirts.my
buddy(R.I.P.)used to wear it alla time.i didnt buy one,thought it was too much of a giveaway fo
da cops.cIIornothing,i meant u of course,ur advice was great help,tip of da hat to you,bro.
your from europe so i wont knock your english but this is how a space bar works. its,hard.to.read.shit,like,that
2HI2C
10-02-2007, 04:31 PM
your from europe so i wont knock your english but this is how a space bar works. its,hard.to.read.shit,like,that
especially.with/one,eye.closed!
Lu_cid
10-30-2007, 12:22 AM
haven’t seen avenza's in a min but for awhile, but SWIM used to have problems with rigs getting clogged so then used to double filter w/ cotton and 2 diff gauge needles drawing the liquid up with the larger first this worked well. Especially with not available micron filters @ hand reduced clogging by a large margin.
bronyraur
11-02-2007, 11:02 AM
your from europe so i wont knock your english but this is how a space bar works. its,hard.to.read.shit,like,that
people speak English in Europe.
and there's quite a few stateside people who are much more difficult to understand.
Inspektahdek
11-06-2007, 10:17 AM
people speak English in Europe.
and there's quite a few stateside people who are much more difficult to understand.
I am an example of this and I totally agree with braun on this one haha
vBulletin® v3.8.2, Copyright ©2000-2009, Jelsoft Enterprises Ltd.